New
-19%
Regular price
$16.95
$20.95
Sold out
Uses an L298N H-Bridge designed to drive inductive loads, such as relays, solenoids, DC and stepping motors. It can also drive two independent DC motors or 1 stepper motor at 2A continuous current per channel. Standard Arduino ...
New
-20%
Regular price
$23.95
$29.95
Sold out
This USB WiFi module is a complete and self-contained WiFi network solution that can operate independently or as a slave on other host MCUs. It can be booted directly from an external flash when it is powered by an application ...
New
-42%
Regular price
$36.50
$63.50
Sold out
Get creative, get connected & get coding with the latest BBC Micro:bit Board. Not only does the new V2 board sense and react sound (with the built-in microphone) but you can also play around with sound via the built-in ...
New
-36%
Regular price
$39.00
$61.00
Sold out
The Pi Cap is an addon board for the Raspberry Pi A+, B+, 2 B, 3 B and Zero. It features a dedicated capacitive sensing IC, 3.5mm stereo audio output, push switch, RGB LED and prototyping area. Note: Raspberry Pi's shown for ...
New
-60%
Regular price
$11.95
$29.95
Sold out
This 30A Current Sensor Module has been designed to be used within Arduino projects. Its a fully Integrated, Hall Effect-Based Linear AC/DC Current Sensor with a 30A rating. Typical applications include motor control, load dete...
New
-60%
Regular price
$11.95
$29.95
Sold out
This 5A Current Sensor Module has been designed to be used within Arduino projects. Its a fully Integrated, Hall Effect-Based Linear AC/DC Current Sensor with a 5A rating. Typical applications include motor control, load detect...
New
-48%
Regular price
$17.95
$34.95
Sold out
A handy Wi-Fi activated relay module for Arduino and other development applications. Perfect for use in home automation and IOT projects or anywhere you need to control a sensor or device over wireless communication. The 3A rat...
New
-31%
Regular price
$23.95
$34.90
Sold out
This CAN-BUS Shield has been designed to be used with Arduino controllers. The onboard BUS control chip can realize the data control on the CAN bus and data communication between devices. It is compatible with the Arduino UNO s...
New
-68%
Regular price
$7.95
$24.95
Sold out
Ideal for home appliance control. 5V-12V TIL control signal suitable for controlling DC / AC signal. It can be controlled directly by Micro-controller (Raspberry Pi, Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). ...
New
-66%
Regular price
$9.95
$29.95
Sold out
Adapter to allow the serial communication via USB port for programming Z 6360 (ESP8266) Wi-Fi modules. Note: to enter programming mode, this board requires GPIO-0 to be shorted to ground in order to bring its status to low.
New
-64%
Regular price
$8.95
$24.95
Sold out
A non-contact normally open switch which operates via a nearby magnetic field. Connects to a digital input on an Arduino board.
New
-17%
Regular price
$69.95
$84.95
Sold out
Add fingerprint authentication to your access control project. This device can store up to 20 individual prints via 360° recognition. Communications over standard TTL?serial and is powered by 5V DC. You can even download finger...